Materials E-Guide
Download Center
Metco 8102 is a wire product with a composition similar to Stellie 12 that can be applied using arc welding processes such as GMAW or GTAW. Deposits exhibit high resistance to abrasion, low-angle erosion and sliding wear, while providing good resistance to impact and cavitation. It is recommended to run against a mating surface coated with Metco 8101. f Metco 8101. It can be used when a hard surface is needed up to 700 °C (1290 °F).
Characteristics
| Material type | Wire Material |
|---|---|
| Product form | Wire |
| Material safety datasheet number | 50-2533 |
| Achieved surface function primary |
Abrasion Protection Erosion Protection in Gas Flow Sliding Wear Protection |
| Achieved surface function secondary |
Impact Resistance Cavitation Protection |
| Suitable for service environmen |
Metal Contact |
| Liquidus temp. | 1365 |
| Solidus temp. | 1200 |
| Base composition | Cobalt |
| Nominal chemistry | Co 26Cr 7W 2Ni 1Fe 0.3Mn 1.4C 1Si |
| Max. service temp. | 700 |
| Recomm metco spray gun |
PPG LD/U LD/U2 |
| Recommended process technology |
Gas Tungsten Arc Welding Gas Metal Arc Welding |
| Datasheet number | DSM-0218 |