Choose your country / language

Metco 7010

Metco 7010

Metco 7010 is a chromium-free, self-fluxing alloy for use in applications requiring high toughness and ductility with very good fluidity and wetting behavior. It is useful for both mild corrosion applications and buildup of worn parts. Blend with tungsten carbide to provide a wear-resistant coating with a tough matrix for applications impact resistance is needed . Application using PTA and finishing with diamond grinding is recommended. It has a fused hardness of approximately HRC 25 to 30.


Material type Thermal Spray Powder
Product form Powder
Material safety datasheet number 50-1039
Achieved surface function primary Abrasion Protection
Adhesive Wear Protection
Erosion Protection in Gas Flow
Erosion Protection in Liquid Flow
Sliding Wear Protection
Solid Particle Erosion Protection
Dimensional Restoration
Suitable for service environmen Acidic Liquid, Not Specified
Crude Oil
Engine Oil
Gravel/Stone/Rock/Concrete Contact
Metal Contact
Soil//Sand/Silt/Clay Contact
Seawater/Brackish Water
Plastic/Rubber/Polymer Contact
Base composition Nickel
Nominal chemistry Ni 3.5Si 1.8B
Max. service temp. 540
Achieved microhardness (min) 25HRC
Achieved macrohardness (max) 30HRC
Recomm metco spray gun 3MB
Recommended process technology Plasma Transferred Arc
Oxy-Acetylene Welding
Spray and Fuse Powder Welding
Recommended finishing Grinding, diamond (preferred) or green silicon carbide
Datasheet number DSM-0412

Relevant articles

Article Number Product Size Packaging size
1083802 Metco 7010 -180 +53 μm 10.0 lb Inquire / Contact Us

© Copyright 2024

Back to top keyboard_arrow_up